Challenger MT275 vs John Deere 4410 | Farm Tractors Comparison

Add

Compare:

Overview:

There are 60 differences and 14 similarities between Challenger MT275, John Deere 4410

Production
Model Year
2003	2002
Production Manufacturer
Iseki	John Deere
Factory
Matsuyama, Japan	Augusta, Georgia, Usa
Distributor
Agco

Capacity
Capacity Fuel
	10 gal
Capacity Front axle
	4.7 qts
Hydraulic system
	6.3 Gal [23.8 L] (gear)6.8 Gal [25.7 L] (hydro)
Power Take-off (PTO)
Rear RPMs
	540
Rear PTO
Independent	Independent
Mid PTO
Optional	Optional
Mid RPMs
	2,100
Mechanical
Mechanical Steering
Hydrostatic Power	Power
Chassis
4x4 Mfwd 4wd	4x4 Mfwd 4wd
Brakes
	Wet Disc
Cab
Two-post Rops	Two-post Rops. Foldable Rops Optional.
Differential lock
	Mechanical
Engine
Engine Fuel
Diesel	Diesel
Engine Type
	Yanmar 3tne88
Engine Aspiration
Natural	Natural
Engine Cylinders
3	3
Engine Bore/Stroke
	3.23x3.31 Inches [82 X 84 Mm]
Engine Displacement
	81.2 ci
Engine Cooling
Liquid	Liquid
Engine Compression
	18.5:1
Engine Rated RPMs
	2,600
Engine Starter volts
	12
Engine Air cleaner
	Dry
Engine Power
40.1 hp	34.6 hp
Engine Oil capacity
	4.5 qts
Engine Coolant
	6 qts
Engine Starter power
	1.9 hp
Engine Idle RPMs
	1000-2810
Transmission
Transmission Type
Shuttle	Power Shuttle
Transmission Comments
	Four Gears (1-4) In Three Ranges (a-c) With Reverser Lever. Gears Are Synchronized And May Be Shifted On The Move Using The Clutch. Tractor Must Be Stopped To Shift Ranges. Forward/reverse Direction Changes May Be Done On The Move, Without The Clutch, By Using The Reverser Lever.
Transmission Oil capacity
	25.2 qts
Transmission Transmission
	Epowrreverser
Transmission Gears
8 forward	12 forward
Transmission Speeds
	With 11.2-24 Rear Tires.
Dimensions
Dimensions Width
	50 inches
Dimensions / Weight
3,107 lbs	2,900 lbs
Wheelbase
	68 inches
Length
	117 inches
Ground Clearance
	13.4 inches
Height (ROPS)
	82.4 Inches [209 Cm] (fixed)90 Inches [228 Cm] (folding)
Height (hood)
	53.3 inches
Drawbar capacity
	562 lbs
Front axle load
	1588 lbs
Rear axle load
	4,410 lbs
Hydraulics
Hydraulics Type
	Open Center
Hydraulics Valves
	5
Pressure
	2,500 psi
Capacity (cu. ft.)
	6.3 Gal [23.8 L] (gear)6.8 Gal [25.7 L] (hydro)
Valve flow
	8.6 gpm
Total flow
12.2 gpm	13.9 gpm
Steering flow
	5.3 gpm
Transmission-2
Transmission-2 Type
	Hydrostatic
Transmission-2 Comments
	Three-range Hydrostatic Transmission With Foot Pedals And Cruise Control. Tractor Must Be Stopped To Shift Ranges. Automotive Cruise Control Option Allows Set Speed To Be Adjusted With Rocker Switch. Speedmatch Option Allows A Maximum Speed To Be Set And Full Pedal Travel Used To Achive That Speed. Loadmatch Option Prevents The Tractor From Stalling During Heavy Loads. The Motionmatch Option Enables The Acceleration Rate To Be Set To Fast Or Slow.
Transmission-2 Oil capacity
	27.2 qts
Transmission-2 Transmission
	Ehydro
Transmission-2 Gears
	Infinite (3-range) Forward And Reverse
Transmission-2 Speeds
	With 11.2-24 Rear Tires.
3-Point Hitch
Rear Type
I	I
Rear lift (at 24"/610mm)
2,100 lbs	2,200 lbs
Rear lift (at ends)
2,755 lbs
Power
PTO (claimed)
32.4 hp	30 Hp [22.4 Kw] (gear)28.5 Hp [21.3 Kw] (hydro)
Engine (gross)
40.1 hp	34.6 hp
Electrical
Ground
	Negative
Charging system
	Alternator
Charging amps
	4055 (optional)
Tires
Ag front
	7.00-14
Ag rear
	11.2-24
Battery
Volts
	12
Number
	1
Cold-cranking amps
	500