| Production |
| Model Year |
| 2003 |
2010 |
| Production Manufacturer |
| Iseki |
John Deere |
| Factory |
| Matsuyama, Japan |
Waterloo, Iowa, Usa |
| Distributor |
| Agco |
|
|
| Capacity |
| Capacity Fuel |
|
180 gal |
| Hydraulic system |
|
9.5 Gal [36.0 L] 14.5 Gal [54.9 L] (with Aux Reservoir) |
| Power Take-off (PTO) |
| Rear RPMs |
|
540 |
| Rear PTO |
| Independent |
Independent |
| Mid PTO |
| Optional |
|
| Engine RPMs |
|
540@18171000@2000 |
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Hydrostatic Power |
| Chassis |
| 4x4 Mfwd 4wd |
4x2 2wd4x4 Mfwd 4wd Optional4x4 Independent Link Suspension (ils) Mfwd 4wd Optional |
| Brakes |
|
Wet Disc |
| Cab |
| Two-post Rops |
Commandview Cab Standard. |
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
|
John Deere Powertech Inline |
| Engine Aspiration |
| Natural |
Variable Geometry Turbocharged |
| Engine Cylinders |
| 3 |
6 |
| Engine Bore/Stroke |
|
4.661x5.354 Inches [118 X 136 Mm] |
|
Engine Displacement |
|
548 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
|
16.3:1 |
|
Engine Rated RPMs |
|
2,100 |
| Engine Starter volts |
|
12 |
| Engine Air cleaner |
|
Dual Paper Elements |
| Engine Valves |
|
24 |
|
Engine Power |
| 33 hp |
240 hp |
| Engine Oil capacity |
|
25.5 Qts [24.1 L] 26 Qts [24.6 L] (ils) |
| Engine Coolant |
|
42.3 qts |
| Engine Idle RPMs |
|
900-2200 |
| Engine Operating RPMs |
|
1500-2100 |
| Transmission |
| Transmission Clutch |
|
Hydraulic Wet Disc |
| Transmission Type |
|
Full Power Shift |
| Transmission Comments |
|
Full Power Shift Transmission Operated With Right-hand Control Lever. Transmission Defaults To Gear 7-forward And 2-reverse On Startup, Although This May Be Re-programmed. Automatic Powershift (aps) Enables Automatic Shifting To Maintain Engine Load. |
| Transmission Oil capacity |
|
160 Qts [151.4 L] 168 Qts [159.0 L] (ils) |
| Transmission Transmission |
| Powershuttle |
John Deere Powershift |
| Transmission Gears |
| 16 forward |
16 forward |
| Transmission Speeds |
|
|
| Dimensions |
| Dimensions / Weight |
| 3,041 lbs |
21, 774 Lbs [9876 Kg] (2wd)25, 147 Lbs [11406 Kg] (ils 4wd) |
| Wheelbase |
|
118.9 Inches [302 Cm] (ils), 120.1 (mfwd), 126.8 (2wd) |
| Length |
|
219.1 inches |
| Height |
|
122.9 inches |
| Ground Clearance |
|
17.4 inches |
| Hydraulics |
| Hydraulics Type |
|
Closed Center Pfc |
| Hydraulics Valves |
|
3 to |
| Pressure |
|
2,098 psi |
| Capacity (cu. ft.) |
|
9.5 Gal [36.0 L] 14.5 Gal [54.9 L] (with Aux Reservoir) |
| Valve flow |
|
31.7 gpm |
| Total flow |
| 12.2 |
44 |
| Transmission-2 |
| Transmission-2 Type |
| Hydrostatic |
|
| Transmission-2 Comments |
|
Ivt Available With 40 Or 50 Kph (25 Or 31 Mph) Maximum Speed. With Maximum Speed Set To Less Than 2 Kph The Transmission Automatically Enters Creeper Mode. |
| Transmission-2 Transmission |
|
John Deere Infinitely Variable Transmission (ivt) |
| Transmission-2 Gears |
| Infinite (3-range) Forward And Reverse |
Infinite Forward And Reverse |
| Transmission-2 Speeds |
|
|
| 3-Point Hitch |
| Rear Type |
| I |
Iii/iiinivn/iii (optional) |
| Rear lift (at 24"/610mm) |
| 2, 100 Lbs [952 Kg] (gear)1, 940 Lbs [879 Kg] (hydro) |
12, 400 Lbs [5624 Kg] 15, 200 Lbs [6894 Kg] (optional)17, 300 Lbs [7847 Kg] (optional) |
| Rear lift (at ends) |
| 2, 755 Lbs [1249 Kg] (gear)2, 866 Lbs [1300 Kg] (hydro) |
|
| Power |
| PTO (claimed) |
| 27 Hp [20.1 Kw] (gear)25 Hp [18.6 Kw] (hydro) |
180 hp |
| PTO (tested) |
|
208.27 hp |
| Drawbar (tested) |
|
158.05 hp |
|
Engine |
|
240 hp |
| Engine (gross) |
| 33 hp |
|
| Electrical |
| Ground |
|
Negative |
| Charging system |
|
Alternator |
| Charging amps |
|
200 |
| Tires |
| Ag front |
|
11.00-24 (2wd)420/90r30 (4wd) |
| Ag rear |
|
480/80r46 |
| Battery |
| Volts |
|
12 |
| Number |
|
2 |
|
Cold-cranking amps |
|
925 |
Challenger MT525B
Challenger MT555B
Challenger MT565B
Challenger MT225B
Bobcat CT120
CaseIH Farmall DX18E