Add
Compare:
Overview:
There are 70 differences and 6 similarities between CaseIH Farmall 75N, New Holland TN60A
| Production |
| Model Year |
| 2008 |
2004 |
| Production Manufacturer |
| Caseih |
New Holland |
| Factory |
|
Jesi, Italy |
|
| Capacity |
| Capacity Fuel |
|
23 gal |
| Power Take-off (PTO) |
| Rear RPMs |
|
540 |
| Rear PTO |
|
Independent |
| Mechanical |
| Mechanical Steering |
|
Hydrostatic Power |
| Chassis |
| 4x2 2wd4x4 Mfwd 4wd Optional |
4x2 2wd |
| Brakes |
|
Differential Wet Disc |
| Cab |
| Rops, Cab Optional |
Rops. Canopy Optional. |
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
|
New Holland |
| Engine Aspiration |
| Turbocharged Intercooled |
Natural |
| Engine Cylinders |
| 4 |
3 |
| Engine Bore/Stroke |
|
4.094x4.528 Inches [104 X 115 Mm] |
|
Engine Displacement |
| 179 ci |
179 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
|
17:1 |
|
Engine Rated RPMs |
|
2,300 |
| Engine Torque |
|
148 lb |
| Engine Torque RPMs |
|
1400 |
| Engine Starter volts |
|
12 |
| Engine Air cleaner |
|
Dual Paper Elements |
|
Engine Power |
| 76 hp |
55 hp |
| Engine Starter type |
| Electric |
|
| Engine Emissions |
|
Tier 2 |
| Fuel use |
|
3 gal |
| Transmission |
| Transmission Clutch |
|
280mm Dry Cerametallic Plate |
| Transmission Type |
| Mechanical Shuttle |
Constant Mesh With Mechanical Shuttle |
| Transmission Comments |
|
Left-hand Mechanical Shuttle Required Clutching. |
| Transmission Gears |
| 16 forward |
8 forward |
| Dimensions |
| Dimensions Width |
| 52.9 Inches [134 Cm] (2wd)53.4 Inches [135 Cm] (4wd) |
67.2 inches |
| Dimensions / Weight |
|
5, 180 Lbs [2349 Kg] (2wd), 5, 400 (4wd) |
| Wheelbase |
|
81.5 Inches [207 Cm] (2wd), 78.9 (4wd) |
| Length |
|
151.6 inches |
| 2WD turn radius |
|
11.8 feet |
| 4WD turn radius |
|
12.4 feet |
| Weight (ballasted) |
|
6,460 lbs |
| Height (ROPS) |
|
95.1 inches |
| Hydraulics |
| Hydraulics Type |
|
Open Center |
| Hydraulics Valves |
| 2 |
1 to |
| Pressure |
|
2,755 psi |
| Valve flow |
| 12.4 Gpm [46.9 Lpm] (2wd)17.2 Gpm [65.1 Lpm] (4wd) |
12.4 gpm |
| Steering flow |
|
7.2 gpm |
| Transmission-2 |
| Transmission-2 Clutch |
|
280mm Dry Cerametallic Plate |
| Transmission-2 Type |
| Power Shuttle |
Partially Synchronized With Mechanical Shuttle |
| Transmission-2 Comments |
|
Four Synchronized Gears In Three Ranges. Left-hand Mechanical Shuttle Requires Clutching. |
| Transmission-2 Transmission |
|
Synchro Command |
| Transmission-2 Gears |
| 32 forward |
12 forward |
| Loader |
| Loader Weight |
|
800 Lbs [362 Kg] (without Bucket) |
| Loader Loader type |
|
New Holland 32lc |
| Loader Height (to pin) |
|
128 inches |
| Loader Dump clearance |
|
96 inches |
| Loader Dump reach |
|
38 inches |
| Loader Dump angle |
|
53 |
| Loader Rollback angle |
|
38 |
| Loader Lift to full height (at 800mm) |
|
2,600 lbs |
| Loader Breakout force (lift) |
|
3,900 lbs |
| 3-Point Hitch |
| Rear Type |
| Ii |
I/ii |
| Rear lift (at 24"/610mm) |
| 3,962 lbs |
3,960 lbs |
| Power |
| PTO (claimed) |
| 62 hp |
45 hp |
| PTO (tested) |
|
48.3 hp |
| Drawbar (tested) |
|
38.4 hp |
|
Engine |
| 76 hp |
55 hp |
| Engine (gross) |
|
57 hp |
| Electrical |
| Ground |
|
Negative |
| Charging system |
|
Alternator |
| Charging amps |
|
65 |
| Tires |
| Ag front |
|
9.5x15 (2wd) |
| Ag rear |
|
14.9 |
| Battery |
| Volts |
|
12 |
| Number |
|
1 |
|
Cold-cranking amps |
|
730 |
| Variants |
| TN60A |
|
Rops |
| TN60DA |
|
Cab |
| TN60SA |
|
Supersteer |
New Holland TN60A
CaseIH Farmall 60
John Deere 5420
John Deere 5225
John Deere 5075M