| Farmtrac 795DTC | VS | All other Farm Tractors |
| Production | |||||
|---|---|---|---|---|---|
| Model Year | 2010 | ||||
| Production Manufacturer |
SAME (equals average)
|
vs | 1.1% Farm Tractors have SAME |
||
| Factory | Italy | ||||
| Distributor | Farmtrac | ||||
| Capacity | |||||
|---|---|---|---|---|---|
| Capacity Fuel |
21.2 gal (49.15 gal lower than average)
|
vs |
70.35 gal
|
||
| Power Take-off (PTO) | |||||
|---|---|---|---|---|---|
| Rear RPMs |
540 (68.25 lower than average)
|
vs |
608.25
|
||
| Rear PTO | Independent | vs | 78.6% Farm Tractors have independent |
||
| Mechanical | |||||
|---|---|---|---|---|---|
| Mechanical Steering | Hydrostatic Power | vs | 81.1% Farm Tractors have hydrostatic power |
||
| Chassis | 4x4 Mfwd 4wd | vs | 52.8% Farm Tractors have 4x4 MFWD 4WD |
||
| Brakes | Hydraulic Wet Disc | vs | 24.3% Farm Tractors have hydraulic wet disc |
||
| Cab | ROPS | ||||
| Hydraulics | |||||
|---|---|---|---|---|---|
| Hydraulics Valves |
2 (0.64 lower than average)
|
vs |
2.64
|
||
| Valve flow |
14.3 gpm (2.78 gpm lower than average)
|
vs |
17.08 gpm
|
||
| Total flow |
21.8 gpm (2.85 gpm lower than average)
|
vs |
24.65 gpm
|
||
| Steering flow |
7.5 gpm (0.66 gpm higher than average)
|
vs |
6.84 gpm
|
||
| 3-Point Hitch | |||||
|---|---|---|---|---|---|
| Rear Type |
II (36.36 lower than average)
|
vs | 23.3% Farm Tractors have II |
||
| Rear lift (at ends) |
6829 lbs (6823 lbs higher than average)
|
vs |
6,180 lbs
|
||
| Power | |||||
|---|---|---|---|---|---|
| PTO (claimed) |
84 hp (28.68 hp lower than average)
|
vs |
112.68 hp
|
||
| Engine |
95 hp (52.82 hp lower than average)
|
vs |
147.82 hp
|
||
| Electrical | |||||
|---|---|---|---|---|---|
| Charging system | Alternator | ||||
| Charging amps |
65 (46.12 lower than average)
|
vs |
111.12
|
||
| Battery | |||||
|---|---|---|---|---|---|
| Volts |
12 (equals average)
|
vs |
12.00
|
||
| Number |
1 (0.65 lower than average)
|
vs |
1.65
|
||
| Cold-cranking amps |
800 (38.52 lower than average)
|
vs |
838.52
|
||