| Production |
| Model Year |
| 2008 |
2008 |
| Production Manufacturer |
| John Deere |
John Deere |
| Factory |
| Augusta, Georgia, Usa |
Saltillo, Mexico |
| Original price (USD) |
| $49, 984 (2009 Rops) |
$58, 752 (2011) |
|
| Capacity |
| Capacity Fuel |
| 30.3 gal |
41.7 gal |
| Capacity Front axle |
|
6.9 qts |
| Hydraulic system |
| 11.9 gal |
15.3 gal |
| Front diff. |
| 5.3 qts |
|
| Front hubs |
| 0.84 qts |
2 qts |
| Power Take-off (PTO) |
| Power Take-off (PTO) Clutch |
|
Dry Disc |
| Rear RPMs |
| 540 |
540 |
| Rear PTO |
| Independent Electrohydraulic |
Independent |
| Engine RPMs |
|
540@21001000@2100 |
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Hydrostatic Power |
| Chassis |
| 4x4 Mfwd 4wd |
4x4 Mfwd 4wd |
| Brakes |
| Hydraulic Wet Disc |
Differential Mechanical Wet Disc |
| Cab |
| Foldable Rops. Optional Deluxe Rops With Upgraded Seat. Optional Cab With Heat And Air Conditioning. |
Folding 2-post Rops Or Cab With Heat And A/c |
| Differential lock |
| Shift-on-the-move Electro-hydraulic Rear Differential Lock |
|
| Final drives |
| Inboard Planetary |
|
| Engine |
| Engine Fuel |
| Diesel |
Diesel Denso Electronic High-pressure Common Rail |
| Engine Type |
| John Deere Powertech E 4045 |
John Deere 4045h Powertech E |
| Engine Aspiration |
| Turbocharged |
Turbocharged Intercooled |
| Engine Cylinders |
| 4 |
4 |
| Engine Bore/Stroke |
| 4.19x5.00 Inches [106 X 127 Mm] |
4.20x5.00 Inches [107 X 127 Mm] |
|
Engine Displacement |
| 276 ci |
276 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
|
19:1 |
|
Engine Rated RPMs |
| 2,200 |
2,100 |
| Engine Torque |
| 420 lb |
387 lb |
| Engine Torque RPMs |
| 1400 |
1500 |
| Engine Starter volts |
| 12 |
12 |
| Engine Air cleaner |
| Dry |
|
| Engine Valves |
|
8 |
|
Engine Power |
| 105 hp |
|
| Engine Oil capacity |
| 8.8 qts |
13 qts |
| Engine Emissions |
|
Tier 3 |
| Engine Coolant |
| 12 qts |
17.4 qts |
| Engine Oil change |
|
250 h |
| Engine Firing order |
|
1-3-4-2 |
| Engine Intake valve clearance |
|
0.01 |
| Engine Exhaust valve clearance |
|
0.02 |
| Engine Idle RPMs |
|
900-2200 |
| Engine Rated Power (EC 97/98) |
|
137.8 hp |
| Transmission |
| Transmission Clutch |
|
Hydraulic Wet Disc |
| Transmission Type |
| Partially Synchronized |
Partially Synchronized With Power Shuttle |
| Transmission Comments |
| Operated Via Three Levers And Foot Clutch. The Speed Shift Lever Selects One Of Four Speeds. The Range Shift Lever Selects One Of Four Ranges. Reverser Lever Selects Direction Of Travel. Synchronized Shuttle Shift With Reverser Lever, Or Speed Change With Speed Shift Lever, While Moving Using The Clutch. Tractor Must Be Stopped To Change Ranges. |
Three Gears (1-3) In Each Of Three Ranges (a-c) Plus Left-hand Reverser. Forward/reverse Powershift. Synchronized Shift Between Gears With Clutch. Shifts Between Ranges Are Unsynchronized: The Tractor Must Be Stopped And Clutch Used To Shift Range. |
| Transmission Oil capacity |
|
61.2 qts |
| Transmission Transmission |
| Syncreverser |
John Deere Powrreverser |
| Transmission Gears |
| 16 forward |
9 forward |
| Transmission Speeds |
| With 16.9-30 Rear Tires. |
With 18.4-34 Rear Tires. |
| Dimensions |
| Dimensions Width |
|
72 inches |
| Dimensions / Weight |
| 7,300 lbs |
|
| Wheelbase |
| 85.6 inches |
92.5 inches |
| Weight (operating) |
|
9,920 lbs |
| Length |
|
166 inches |
| Height (cab) |
|
107.5 inches |
| Front tread |
| 52.8 To 75 Inches [134 To 190 Cm] |
63.6 To 79.4 Inches [161 To 201 Cm] |
| Rear tread |
| 53.1 To 80.9 Inches [134 To 205 Cm] |
59.5/63.5/67.6/71.3/75.4/79.4 Inches [151/161/171/181/191/201 Cm] |
| 4WD turn radius |
| 13.9 feet |
14.7 feet |
| Weight (Shipping) |
|
8,730 lbs |
| Weight (ballasted) |
|
13,095 lbs |
| Ground Clearance |
| 17.9 Inches [45 Cm] (4wd Front Axle) |
|
| Rear Axle |
|
72 Inch Length [1828 Mm] (flange) |
| Height (exhaust) |
|
106 inches |
| Clearance (front axle) |
|
18 inches |
| Hydraulics |
| Hydraulics Type |
| Hy-gard:-10+ |
Open Center |
| Hydraulics Valves |
|
2 to |
| Pressure |
| 2,828 psi |
2,830 psi |
| Pump flow |
| 18.4 gpm |
17.6 gpm |
| Capacity (cu. ft.) |
| 11.9 gal |
15.3 gal |
| Total flow |
| 24.7 gpm |
|
| Steering flow |
| 6.3 gpm |
6.9 gpm |
| Steering press. |
| 1922 psi |
|
| Transmission-2 |
| Transmission-2 Type |
| Partially Synchronized |
|
| Transmission-2 Comments |
| Operated Via Two Levers And Foot Clutch. Speed Shift Lever Selects Three Forward Gears Or Reverse. Range Shift Lever Selects One Of Four Ranges. Synchronized Shuttle Shift Or Speed Change Shift While Moving Using The Clutch. Tractor Must Be Stopped To Change Range. |
|
| Transmission-2 Transmission |
| Syncshuttle Plus |
|
| Transmission-2 Gears |
| 12 forward |
|
| Transmission-2 Speeds |
| With 16.9-30 Rear Tires. |
|
| Loader |
| Loader Loader type |
| John Deere 553 |
John Deere 563 |
| Loader Height (to pin) |
| 123 inches |
133.8 inches |
| Loader Dump clearance |
| 95 inches |
93.2 inches |
| Loader Dump reach |
| 40 inches |
36.4 inches |
| Loader Dump angle |
| 43 |
71 |
| Loader Rollback angle |
| 31 |
41 |
| Loader Breakout force (bucket) |
|
4,900 lbs |
| Loader Lift to full height (at pin) |
| 2,917 lbs |
4,063 lbs |
| Loader Lift to full height (at 800mm) |
|
2,773 lbs |
| Loader Bucket width |
|
73 inches |
| Loader Reach at ground |
| 71 inches |
87.6 inches |
| Loader Breakout force (at pin) |
| 5,537 lbs |
6,632 lbs |
| Loader Breakout force (at 800mm) |
|
4,700 lbs |
| Loader Raise time to height |
|
5.6 s |
| Loader Bucket dump time |
|
5.1 s |
| Loader Lowering time |
|
4.8 s |
| Loader Rollback time |
|
5.4 s |
| Loader Lift to 1.5m (at pin) |
|
5,154 lbs |
| Loader Lift to 1.5m (at 800mm) |
|
3,880 lbs |
| Loader-2 |
| Loader-2 Loader type |
| John Deere 563 |
John Deere 673 |
| Loader-2 Height (to pin) |
| 133 inches |
140 inches |
| Loader-2 Dump clearance |
| 97 inches |
99 inches |
| Loader-2 Dump reach |
| 50 inches |
43 inches |
| Loader-2 Dump angle |
| 72 |
75 |
| Loader-2 Rollback angle |
| 44 |
47 |
| Loader-2 Breakout force (bucket) |
|
5,823 lbs |
| Loader-2 Lift to full height (at pin) |
| 3,982 lbs |
3,960 lbs |
| Loader-2 Lift to full height (at 800mm) |
|
2,782 lbs |
| Loader-2 Bucket width |
|
85 inches |
| Loader-2 Reach at ground |
| 88 inches |
97.1 inches |
| Loader-2 Breakout force (at pin) |
| 6,654 lbs |
7,280 lbs |
| Loader-2 Breakout force (at 800mm) |
|
5,330 lbs |
| Loader-2 Raise time to height |
|
6.6 s |
| Loader-2 Bucket dump time |
|
5.6 s |
| Loader-2 Lowering time |
|
5.8 s |
| Loader-2 Rollback time |
|
6 s |
| Loader-2 Lift to 1.5m (at pin) |
|
5,536 lbs |
| Loader-2 Lift to 1.5m (at 800mm) |
|
4,246 lbs |
| MSL Breakout force (at pin) |
| 5,665 lbs |
|
| MSL Lift to full height (at pin) |
| 3,121 lbs |
|
| 3-Point Hitch |
| Rear Type |
| I/ii |
Ii |
| Rear lift (at 24"/610mm) |
| 4,498 lbs |
6,800 lbs |
| Power |
| PTO (claimed) |
| 90 hp |
115 hp |
| PTO (tested) |
| 81.55 hp |
117.41 hp |
| Drawbar (tested) |
|
96.68 hp |
|
Engine |
| 105 hp |
|
| Engine (gross) |
|
137.8 hp |
| Electrical |
| Ground |
| Negative |
Negative |
| Charging system |
| Alternator |
Alternator |
| Charging amps |
| 70 (rops) |
70 (rops) |
| Tires |
| Ag front |
| 12.4r24 |
|
| Ag rear |
| 480/80r30 |
|
| Lawn/turf front |
| 12ll-16 |
|
| Lawn/turf rear |
| 22.5ll-16 |
|
| Industrial front |
| 12.5/80-18 |
|
| Industrial rear |
| 19.5l-24 |
|
| Standard tires (ag) |
|
Front: 14.9-24. Rear: 18.4-34 |
| Optional tires (ag) |
|
Front: 14.9-24. Rear: 18.4-38 |
| Battery |
| Volts |
| 12 |
12 |
| Number |
| 1 |
1 |
|
Cold-cranking amps |
| 925 |
925 |
| Amp-hours |
|
180 |
| Group |
| 31 |
31 |
| Variants |
| 5105ML |
| Low-profile |
|
CaseIH JX60
CaseIH JX70
CaseIH Farmall 70
John Deere 6220
John Deere 6603
John Deere 6230