| Production |
| Model Year |
| 2005 |
2008 |
| Production Manufacturer |
| John Deere |
New Holland |
| Factory |
| Augusta, Georgia, Usa |
|
| Original price (USD) |
|
$26, 102 (2009) |
|
| Capacity |
| Capacity Fuel |
| 14.5 Gal [54.9 L] 13.8 Gal [52.2 L] (with Cab) |
13.5 Gal [51.1 L] (rops)16 Gal [60.6 L] (cab) |
| Hydraulic system |
| 10.3 Gal [39.0 L] 9.6 Gal [36.3 L] (ehydro) |
|
| Power Take-off (PTO) |
| Rear RPMs |
| 540 |
540 |
| Rear PTO |
| Independent |
Independent |
| Mid PTO |
| Independent (optional) |
|
| Mid RPMs |
| 2,100 |
|
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Power |
| Chassis |
| 4x4 Mfwd 4wd |
4x4 Mfwd 4wd |
| Brakes |
| Wet Disc |
Mechanical Wet Disc |
| Cab |
| Cab Optional With Heat And A/c |
Rops. Canopy Optional. Supersuite Cab Optional With Heat And Air-conditioning. |
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
| John Deere 4042t |
Shibaura Ism-n844l-t |
| Engine Aspiration |
| Turbocharged |
Turbocharged |
| Engine Cylinders |
| 4 |
4 |
| Engine Bore/Stroke |
| 3.386x4.134 Inches [86 X 105 Mm] |
|
|
Engine Displacement |
| 148.9 ci |
135.2 ci |
| Engine Cooling |
| Liquid |
Pre-heating: |
| Engine Compression |
| 20.5:1 |
|
|
Engine Rated RPMs |
| 2,400 |
2,700 |
| Engine Torque |
| 135 lb |
|
| Engine Torque RPMs |
| 1500 |
|
| Engine Starter volts |
| 12 |
12 |
| Engine Air cleaner |
| Paper And Felt Elements |
|
|
Engine Power |
| 53 Hp [39.5 Kw] 60 Hp [44.7 Kw] (sn 650001) |
55 hp |
| Engine Oil capacity |
| 7.9 qts |
6.64 qts |
| Engine Starter |
|
Electric |
| Engine Coolant |
| 6.4 Qts [6.1 L] 8.8 Qts [8.3 L] (with Cab) |
|
| Engine Starter power |
| 2.9 hp |
|
| Transmission |
| Transmission Comments |
| Powrreverser Uses Three Ranges, Four Gears, And A Reverser To Provide 12 Speeds In Each Direction. The Tractor Must Be Stopped, And Clutch Depressed, To Change Ranges. The Gear Can Be Changed While The Tractor Is In Motion Using The Clutch. The Clutch Is Not Needed To Change Directions With The Reverser Lever. |
|
| Transmission Oil capacity |
| 41.2 qts |
|
| Transmission Transmission |
| Powrreverser |
Synchronized Shuttle Shift |
| Transmission Gears |
| 12 forward |
12 forward |
| Transmission Speeds |
| With 13.6-28 Rear Tires. |
|
| Transmission Oil type |
| 0of [-17oc]↑ |
|
| Dimensions |
| Dimensions Width |
| 65.6 Inches [166 Cm] (r1 Tires)91.9 Inches [233 Cm] (r4 Tires) |
71.6 inches |
| Dimensions / Weight |
|
4, 229 Lbs [1918 Kg] (rops)5, 189 Lbs [2353 Kg] (cab) |
| Wheelbase |
| 71.5 inches |
74.8 inches |
| Weight (operating) |
| 3, 855 Lbs [1748 Kg] (rops)4, 345 Lbs [1970 Kg] (cab) |
|
| Length |
| 128.2 inches |
137.3 inches |
| Height (cab) |
|
92.1 inches |
| Front tread |
|
52.6 inches |
| Rear tread |
|
48.7 To 76.4 Inches [123 To 194 Cm] |
| Height |
| 97.2 Inches [246 Cm] (rops)92.4 Inches [234 Cm] (cab)62 Inches [157 Cm] (hood) |
|
| Ground Clearance |
|
14.5 inches |
| Height (ROPS) |
|
91.4 inches |
| Weight (max capacity) |
| 8,820 lbs |
|
| Drawbar capacity |
| 1103 lbs |
|
| Height (backhoe transport) |
|
96 inches |
| Hydraulics |
| Hydraulics Type |
| Open Center |
Open Center |
| Pressure |
| 2,500 psi |
2,489 psi |
| Capacity (cu. ft.) |
| 10.3 Gal [39.0 L] 9.6 Gal [36.3 L] (ehydro) |
|
| Valve flow |
| 12 gpm |
11.6 gpm |
| Total flow |
| 17.1 gpm |
16.9 gpm |
| Steering flow |
| 5.1 gpm |
5.3 gpm |
| Transmission-2 |
| Transmission-2 Type |
| Hydrostatic |
|
| Transmission-2 Comments |
| The Ehydro Uses A Three-position Range Lever And Two Foot Pedals, One For Forward And One For Reverse. The Foot Pedals Must Be Released, And Tractor Stopped, To Change Range. The Ethrottle Feature Allows The Tractor To Automatically Manage Engine Speed. |
|
| Transmission-2 Oil capacity |
| 38.4 qts |
|
| Transmission-2 Transmission |
| Ehydro |
Electro-hydraulic Shuttle Shift |
| Transmission-2 Gears |
| Infinite 3-range Forward And Reverse |
12 forward |
| Transmission-2 Speeds |
| With 16.3-28 Rear Tires. |
|
| Transmission-2 Oil type |
| 0of [-17oc]↑ |
|
| Loader |
| Loader Weight |
|
820 Lbs [371 Kg] (without Bucket) |
| Loader Loader type |
|
New Holland 270tl |
| Loader Height (to pin) |
|
112.3 inches |
| Loader Dump clearance |
|
85.2 inches |
| Loader Dump reach |
|
32 inches |
| Loader Dump angle |
|
49 |
| Loader Rollback angle |
|
39 |
| Loader Lift to full height (at pin) |
|
2,500 lbs |
| Loader Bucket capacity |
|
0.57 cu |
| Loader Lift to full height (at 500mm) |
|
1830 lbs |
| Loader Bucket width |
|
72 inches |
| Loader Breakout force (at pin) |
|
5,000 lbs |
| Loader Breakout force (at 500mm) |
|
3,114 lbs |
| Loader Lift to 1.5m (at pin) |
|
3,500 lbs |
| Loader Lift to 1.5m (at 500mm) |
|
2,213 lbs |
| Backhoe |
| Backhoe Weight |
|
1100 lbs |
| Backhoe Bucket width |
|
9 Inches [22 Cm] 12 Inches [30 Cm] 16 Inches [40 Cm] 18 Inches [45 Cm] 24 Inches [60 Cm] 36 Inches [91 Cm] |
| Backhoe Backhoe type |
|
New Holland 940gh |
| Backhoe Reach from pivot |
|
149 inches |
| Backhoe Bucket force |
|
4,100 lbs |
| Backhoe Dipperstick force |
|
2,670 lbs |
| Backhoe 2-Foot flat digging depth |
|
113.5 inches |
| Backhoe Loading height |
|
91 inches |
| 3-Point Hitch |
| Rear Type |
| I |
I/ii |
| Rear lift (at 24"/610mm) |
| 2,500 lbs |
3,465 lbs |
| Rear lift (at ends) |
| 3,130 lbs |
4,355 lbs |
| Power |
| PTO (claimed) |
| 40 Hp [29.8 Kw] 52 Hp [38.8 Kw] (sn 650001) |
47 Hp [35.0 Kw] 46 Hp [34.3 Kw] (eh Synchro) |
| PTO (tested) |
| 46.58 hp |
|
|
Engine |
| 53 hp |
|
| Engine (gross) |
|
55 hp |
| Electrical |
| Ground |
| Negative |
|
| Charging system |
| Alternator |
Alternator |
| Charging amps |
| 70 |
4055 (cab) |
| Tires |
| Ag front |
| 8.00-16 |
9.5x16 |
| Ag rear |
| 13.6-28 |
14.9x24 |
| Lawn/turf front |
| 27x10.5-1527x12ll-15 |
|
| Lawn/turf rear |
| 44x18.00-2022.5ll-16.1 |
|
| Industrial front |
| 10.00-16.5 |
|
| Industrial rear |
| 17.5l-24 |
|
| Battery |
| Volts |
| 12 |
12 |
| Number |
| 1 |
1 |
|
Cold-cranking amps |
| 770 |
700 |
CaseIH Farmall 50
CaseIH Farmall 65A
Cub Cadet Lx410
Cub Cadet Ex450
Kubota L4400
Kubota L4240