| Production |
| Model Year |
| 2009 |
2007 |
| Production Manufacturer |
| Agco |
John Deere |
| Factory |
| Beauvais, France |
Waterloo, Iowa, Usa |
|
| Capacity |
| Capacity Fuel |
| 155.9 Gal [590.1 L] 182.3 Gal [690.0 L] (without E3) |
350 gal |
| Exhaust fluid (DEF) |
| 7.9 gal |
|
| Hydraulic system |
|
27 gal |
| Power Take-off (PTO) |
| Power Take-off (PTO) Clutch |
|
Electro-hydraulic Wet Disc |
| Rear RPMs |
| 540 |
1000 |
| Rear PTO |
| Independent Electro-hydaulic |
Independent (optional) |
| Front PTO |
| Optional |
|
| Front RPMs |
| 1000 |
|
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Hydrostatic Power |
| Chassis |
| 4x4 Mfwd 4wd |
4x4 Articulated 4wd |
| Brakes |
| Hydraulic Wet Disc |
Hydraulic Wet Discs |
| Cab |
| Cab Standard With Heat And Air-conditioning. Optional Heated Seat, Power Adjustable Mirrors, And Automatic Temperature Control. |
Commandview Cab Standard With Air-conditioning. Optional Automatic Climate Control And Leather Trim. |
| Differential lock |
|
Hydraulic Differential Lock Optional |
| Trailer brakes |
|
Hydraulic Optional |
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
| Agco Sisu Power 84cta |
John Deere Inline |
| Engine Aspiration |
| Turbocharged Intercooled |
Turbocharged Aftercooled |
| Engine Cylinders |
| 6 |
6 |
| Engine Bore/Stroke |
| 4.37x5.71 Inches [111 X 145 Mm] |
4.661x5.354 Inches [118 X 136 Mm] |
|
Engine Displacement |
| 512.6 ci |
549.2 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
| 16.7:1 |
16.3:1 |
|
Engine Rated RPMs |
| 2,200 |
2,100 |
| Engine Torque |
| 1100 lb |
|
| Engine Torque RPMs |
| 1500 |
|
| Engine Starter volts |
| 12 |
12 |
| Engine Comments |
| The Engine Uses Agco's E3 Selective Catalytic Reduction (scr) System To Reduce Nitrogen Oxides (nox). |
|
| Engine Air cleaner |
| Dual Paper Elements |
Dual Paper Elements |
|
Engine Power |
| 320 hp |
325 hp |
| Engine Oil capacity |
|
33.6 qts |
| Engine Emissions |
| Interim Tier 4 |
|
| Engine Starter |
| Electric |
|
| Engine Coolant |
|
50 qts |
| Maximum Power |
| 350 hp |
|
| Transmission |
| Transmission Clutch |
|
Hydraulic Wet Disc |
| Transmission Type |
| Continuously Variable Transmission |
Partial Power Shift |
| Transmission Comments |
|
Three Gears (1-3) In Four Ranges (a-d) With High-low Power Shift. Gears And Range Shifts Are Synchronized Using The Clutch. |
| Transmission Transmission |
| Techstar Cvt |
John Deere Powrsync |
| Transmission Gears |
| Infinite (2-range) Forward And Reverse |
24 forward |
| Transmission Speeds |
| |
With 620/70r42 Tires. |
| Dimensions |
| Dimensions Width |
|
118.6 inches |
| Wheelbase |
| 122.2 inches |
137.8 inches |
| Weight (operating) |
|
34, 510 Lbs [15653 Kg] (520/85r42 Duals) |
| Length |
| 223.2 inches |
270 inches |
| Height (cab) |
| 133.1 inches |
140 inches |
| Weight (Shipping) |
| 24,250 lbs |
32,170 lbs |
| Rear Axle |
|
3.937 By 120 Inches [99x3048 Mm] 4.331 By 120 Inches [110x3048 Mm] (optional) |
| Weight (max capacity) |
| 38,890 lbs |
57,000 lbs |
| Height (hood) |
|
105 inches |
| Height (exhaust) |
|
154 inches |
| Clearance (rear axle) |
|
28.8 inches |
| Hinge pin Ground clearance |
|
18.5 inches |
| Hydraulics |
| Hydraulics Type |
| Closed Center Load Sensing |
Closed Center Pressure-flow Compensated (pfc) |
| Hydraulics Valves |
| 4 to |
4 to |
| Pressure |
| 2,901 psi |
2,900 psi |
| SCV flow |
|
30 gpm |
| Capacity (cu. ft.) |
|
27 gal |
| Valve flow |
| 26.4 gpm |
|
| Total flow |
| 46.2 gpm |
|
| PowrSync Total flow |
|
44 gpm |
| PowerShift Total flow |
|
48 gpm |
| Hi-Flow Total flow |
|
78 gpm |
| Transmission-2 |
| Transmission-2 Clutch |
|
Electronic Wet Disc |
| Transmission-2 Type |
|
Full Power Shift |
| Transmission-2 Transmission |
|
John Deere Powershift |
| Transmission-2 Gears |
|
18 forward |
| Transmission-2 Speeds |
|
With 620/70r42 Tires. |
| Loader |
| Loader Loader type |
| Challenger Ml99b |
|
| Loader Height (to pin) |
| 187 inches |
|
| Loader Dump angle |
| 55 |
|
| Loader Rollback angle |
| 41 |
|
| Loader Breakout force (bucket) |
| 10,560 lbs |
|
| Loader Lift to full height (at pin) |
| 5,610 lbs |
|
| Loader Lift to full height (at 800mm) |
| 4,950 lbs |
|
| Loader Breakout force (lift) |
| 7,700 lbs |
|
| 3-Point Hitch |
| Rear Type |
| Iii, Iv |
4n/3 |
| Rear lift (at 24"/610mm) |
| 21,336 lbs |
15,300 lbs |
| Front Hitch |
| Iii |
|
| Rear lift (at ends) |
| 26,460 lbs |
|
| Front lift (at ends) |
| 11,020 lbs |
|
| Power |
| PTO (claimed) |
| 275 hp |
263 hp |
| PTO (tested) |
| 316.6 hp |
312.59 hp |
| Drawbar (tested) |
| 240.7 hp |
241.53 hp |
|
Engine |
| 320 hp |
325 hp |
| Electrical |
| Ground |
|
Negative |
| Charging system |
| Alternator |
Alternator |
| Charging amps |
| 240 |
200 |
| Tires |
| Ag front |
| 480/70r34 |
620/70 R42 |
| Ag rear |
| 520/85r46 |
620/70 R42 |
| Battery |
| Volts |
| 12 |
12 |
| Number |
|
2 |
|
Cold-cranking amps |
|
950 |
| Drawbar |
| Drawbar |
|
Catergory 4 Standard With Secondary Chain Support. Optional Reinforcement Up To 11, 000 Pounds. Optional 12, 000 Pounds Catergory 5 Drawbar, Not Available With 3-point Hitch Or Pto. |
AGCO RT155A
John Deere 9230
AGCO DT275B
Challenger MT635B
Challenger MT645B
Challenger MT655C
CaseIH Steiger 385