Add
Compare:
Overview:
There are 69 differences and 5 similarities between Challenger MT525B, Minot 25
| Production |
| Model Year |
| 2004 |
2010 |
| Production Manufacturer |
| Agco |
Jinma |
| Factory |
| Beauvais, France |
China |
| Distributor |
|
Minot |
|
| Capacity |
| Capacity Fuel |
| 71 gal |
5.8 gal |
| Capacity Front axle |
|
4.75 qts |
| Hydraulic system |
| 18.5 Gal [70.0 L] (autopower)26.4 Gal [99.9 L] (cvt) |
2.4 gal |
| Power Take-off (PTO) |
| Rear RPMs |
| 540 |
540 |
| Rear PTO |
| Independent |
Live (two-stage Clutch) |
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Power |
| Chassis |
| 4x2 2wd4x4 Mfwd 4wd Optional |
4x4 Mfwd 4wd |
| Brakes |
| Hydraulic Wet Disc |
|
| Cab |
| Cab Standard With Heat And A/c. Optional Pneumatic Cab Suspension And Automatic Climate Control. |
Rops With Canopy. |
| Trailer brakes |
| Hydraulic Optional |
|
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
| Caterpillar 3056c Vertical Inline |
|
| Engine Aspiration |
| Turbocharged |
Natural |
| Engine Cylinders |
| 6 |
3 |
| Engine Bore/Stroke |
| 3.937x5.00 Inches [100 X 127 Mm] |
3.35x3.354 Inches [85 X 85 Mm] |
|
Engine Displacement |
| 365.2 ci |
86.5 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
| 17.5:1 |
|
|
Engine Rated RPMs |
| 2,200 |
2,350 |
| Engine Starter volts |
| 12 |
|
| Engine Air cleaner |
| Dual Paper Elements |
|
|
Engine Power |
|
25 hp |
| Engine Oil capacity |
|
6.3 qts |
| Engine Emissions |
| Tier Ii |
|
| Engine Coolant |
| 26.92 qts |
8.4 qts |
| Pre-heating |
|
Glow Plugs |
| Transmission |
| Transmission Type |
| Partial Power Shift |
|
| Transmission Comments |
| Eight Gears In Four Power Shift Ranges With Power Shuttle. |
|
| Transmission Oil capacity |
|
14.8 qts |
| Transmission Transmission |
| Autopower Iv |
|
| Transmission Gears |
| 32 forward |
12 forward |
| Transmission Speeds |
|
|
| Dimensions |
| Dimensions Width |
| 81.1 inches |
57 inches |
| Wheelbase |
| 112.1 inches |
65 inches |
| Weight (operating) |
| 12, 180 Lbs [5524 Kg] (4wd)14, 835 Lbs [6729 Kg] (cvt 4wd) |
|
| Length |
| 168.5 inches |
118 inches |
| Height (cab) |
| 112.8 inches |
|
| Front tread |
|
42.5 inches |
| Rear tread |
| 60 To 88 Inches [152 To 223 Cm] |
42.1 To 49.2 Inches [106 To 124 Cm] |
| Height |
|
86 inches |
| Weight (Shipping) |
| 11, 052 Lbs [5013 Kg] (2wd)11, 546 Lbs [5237 Kg] (4wd)13, 084 Lbs [5934 Kg] (cvt 4wd) |
2,734 lbs |
| Clearance (drawbar) |
| 15.4 inches |
|
| Ground Clearance |
|
10 inches |
| Hydraulics |
| Hydraulics Type |
| Closed Center Pressure-flow Compensated (pfc) |
|
| Pressure |
| 2,900 psi |
|
| Capacity (cu. ft.) |
| 18.5 Gal [70.0 L] (autopower)26.4 Gal [99.9 L] (cvt) |
2.4 gal |
| Total flow |
| 29 gpm |
3 gpm |
| Rear valves |
| 2 to |
|
| Transmission-2 |
| Transmission-2 Type |
| Partial Power Shift |
|
| Transmission-2 Comments |
| Four Gears With Six Power Shift Ranges. The Autopower Vi Became Acailable In 2005. |
|
| Transmission-2 Transmission |
| Autopower Vi |
|
| Transmission-2 Gears |
| 24 forward |
|
| Transmission-2 Speeds |
| 50 Kph Speeds Available With Front-axle Suspension. |
|
| 3-Point Hitch |
| Rear Type |
| Ii/iii |
|
| Rear lift (at 24"/610mm) |
| 8, 500 Lbs [3855 Kg] 11, 200 Lbs [5080 Kg] (cvt) |
875 lbs |
| Rear lift |
|
I Lbs [0 Kg] |
| Front Hitch |
| Optional |
|
| Front lift |
| 5,500 lbs |
|
| Power |
| PTO (claimed) |
| 95 hp |
|
| PTO (tested) |
| 110.9 hp |
|
| Drawbar (tested) |
| 81.8 hp |
|
| Engine (gross) |
|
25 hp |
| Electrical |
| Ground |
| Negative |
|
| Charging system |
| Alternator |
|
| Charging amps |
| 120 |
|
| Tires |
| Ag front |
| 14l-16.1 (2wd)14.9r28 (4wd) |
6.00-16 |
| Ag rear |
| 18.4r38 |
9.5-24 |
| Battery |
| Volts |
| 12 |
|
| Number |
| 2 |
|
|
Cold-cranking amps |
| 420 |
|
Challenger MT225
Challenger MT265
Bobcat CT122
Cub Cadet 5234D
John Deere 790