Back
 Add

Compare:

Challenger MT225 VS John Deere 8230
 

Overview:

There are 63 differences and 6 similarities between Challenger MT225, John Deere 8230

Production
Model Year
2003 2010
Production Manufacturer
Iseki John Deere
Factory
Matsuyama, Japan Waterloo, Iowa, Usa
Distributor
Agco
Capacity
Capacity Fuel
180 gal
Hydraulic system
9.5 Gal [36.0 L] 14.5 Gal [54.9 L] (with Aux Reservoir)
Power Take-off (PTO)
Rear RPMs
540
Rear PTO
Independent Independent
Mid PTO
Independent
Engine RPMs
540@18171000@2000
Mechanical
Mechanical Steering
Hydrostatic Power Hydrostatic Power
Chassis
4x4 Mfwd 4wd 4x4 Mfwd 4wd
Brakes
Wet Disc
Cab
Two-post Rops Commandview Cab Standard.
Engine
Engine Fuel
Diesel Diesel
Engine Type
John Deere Powertech Inline
Engine Aspiration
Variable Geometry Turbocharged
Engine Cylinders
3
6
Engine Bore/Stroke
4.661x5.354 Inches [118 X 136 Mm]
Engine Displacement
548 ci
Engine Cooling
Liquid Liquid
Engine Compression
16.3:1
Engine Rated RPMs
2,100
Engine Starter volts
12
Engine Air cleaner
Dual Paper Elements
Engine Valves
24
Engine Power
23.3 hp
265 hp
Engine Oil capacity
25.5 Qts [24.1 L] 26 Qts [24.6 L] (ils)
Engine Coolant
42.3 qts
Engine Idle RPMs
900-2200
Engine Operating RPMs
1500-2100
Transmission
Transmission Clutch
Hydraulic Wet Disc
Transmission Type
Full Power Shift
Transmission Comments
Full Power Shift Transmission Operated With Right-hand Control Lever. Transmission Defaults To Gear 7-forward And 2-reverse On Startup, Although This May Be Re-programmed. Automatic Powershift (aps) Enables Automatic Shifting To Maintain Engine Load.
Transmission Oil capacity
160 Qts [151.4 L] 168 Qts [159.0 L] (ils)
Transmission Transmission
Hydrostatic John Deere Powershift
Transmission Gears
Infinite (2-range) Forward And Reverse 16 forward
Transmission Speeds
 
Dimensions
Dimensions / Weight
1670 lbs
23, 747 Lbs [10771 Kg] 25, 147 Lbs [11406 Kg] (ils)
Wheelbase
118.9 Inches [302 Cm] (ils), 120.1 (mfwd)
Length
219.1 inches
Height
122.9 inches
Ground Clearance
17.4 inches
Hydraulics
Hydraulics Type
Closed Center Pfc
Hydraulics Valves
3 to
Pressure
2,098 psi
Capacity (cu. ft.)
9.5 Gal [36.0 L] 14.5 Gal [54.9 L] (with Aux Reservoir)
Valve flow
31.7 gpm
Total flow
7.9 gpm
44
Transmission-2
Transmission-2 Comments
Ivt Available With 40 Or 50 Kph (25 Or 31 Mph) Maximum Speed. With Maximum Speed Set To Less Than 2 Kph The Transmission Automatically Enters Creeper Mode.
Transmission-2 Transmission
John Deere Infinitely Variable Transmission (ivt)
Transmission-2 Gears
Infinite Forward And Reverse
Transmission-2 Speeds
 
3-Point Hitch
Rear Type
I
Iii/iiinivn/iii (optional)
Rear lift (at 24"/610mm)
694 lbs
12, 400 Lbs [5624 Kg] 15, 200 Lbs [6894 Kg] (optional)17, 300 Lbs [7847 Kg] (optional)
Rear lift (at ends)
1210 lbs
Power
PTO (claimed)
19 hp
200 hp
PTO (tested)
232.51 hp
Drawbar (tested)
180.35 hp
Engine
265 hp
Engine (gross)
23.3 hp
Electrical
Ground
Negative
Charging system
Alternator
Charging amps
200
Battery
Volts
12
Number
2
Cold-cranking amps
925
Variants
8230
Row-crop Tractor
8230T
Crawler Tractor

saved