Add
Compare:
Overview:
There are 66 differences and 15 similarities between CaseIH Farmall 60, John Deere 5705
| Production |
| Model Year |
| 2008 |
2000 |
| Production Manufacturer |
| Shibaura |
John Deere |
| Distributor |
| Caseih |
|
|
| Capacity |
| Capacity Fuel |
| 13.5 gal |
27.7 gal |
| Hydraulic system |
|
10.6 gal |
| Power Take-off (PTO) |
| Power Take-off (PTO) Clutch |
|
Mechanical Dry Disc |
| Rear RPMs |
| 540 |
540 |
| Rear PTO |
| Independent |
Independent |
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Hydrostatic Power |
| Chassis |
| 4x4 Mfwd 4wd |
4x2 2wd |
| Brakes |
| Wet Disc |
Hydraulic Wet Disc |
| Cab |
| Rops |
Two-post Rops. |
| Engine |
| Engine Fuel |
| Diesel |
|
| Engine Type |
| Shibaura Ism-n844l-t |
John Deere 4045t Series 350 |
| Engine Aspiration |
| Turbocharged |
Turbocharged |
| Engine Cylinders |
| 4 |
4 |
| Engine Bore/Stroke |
| 3.31x3.94 Inches [84 X 100 Mm] |
4.15x5.00 Inches [105 X 127 Mm] |
|
Engine Displacement |
| 135.2 ci |
276 ci |
| Engine Cooling |
| Liquid |
Liquid |
|
Engine Rated RPMs |
| 2,800 |
2,400 |
| Engine Torque |
|
243.4 lb |
| Engine Torque RPMs |
|
1600 |
| Engine Starter volts |
|
12 |
|
Engine Power |
| 60 hp |
85 hp |
| Engine Oil capacity |
|
12.7 qts |
| Engine Coolant |
|
15.85 qts |
| Transmission |
| Transmission Clutch |
|
Cerametalic Dry Disc |
| Transmission Comments |
|
Three Gears (1-3) In Three Ranges (a-c). |
| Transmission Oil capacity |
|
42.3 qts |
| Transmission Transmission |
| Synchro Shuttle |
John Deere Top Shaft Synchronized (tss) |
| Transmission Gears |
| 12 forward |
9 forward |
| Transmission Speeds |
|
With 18.4-30 R1 Rear Tires. |
| Dimensions |
| Dimensions Width |
| 64.4 inches |
|
| Dimensions / Weight |
| 4, 209 Lbs [1909 Kg] (synchro)4, 238 Lbs [1922 Kg] (power Shuttle) |
|
| Wheelbase |
| 74.8 inches |
85.7 inches |
| Length |
| 137.3 inches |
151.6 inches |
| Front tread |
|
56.7 To 78.7 Inches [144 To 199 Cm] 45.7 To 77.4 Inches [116 To 196 Cm] |
| Rear tread |
|
55.1 To 70.9 Inches [139 To 180 Cm] |
| Height |
| 95 inches |
103.1 inches |
| Ground Clearance |
| 12.9 Inches [32 Cm] (front Axle) |
|
| Rear Axle |
|
Flange |
| Weight (max capacity) |
|
10,800 lbs |
| 2WD Weight |
|
5,952 lbs |
| 4WD Weight |
|
6,393 lbs |
| Hydraulics |
| Hydraulics Type |
| Open Center |
Open Center Gear Pump |
| Hydraulics Valves |
|
2 |
| Pressure |
| 2,489 psi |
2,756 psi |
| Pump flow |
|
11.36 gpm |
| SCV flow |
|
10.57 gpm |
| Capacity (cu. ft.) |
|
10.6 gal |
| Valve flow |
| 12 gpm |
|
| Total flow |
| 17.53 gpm |
|
| Steering flow |
| 5.5 gpm |
6.9 gpm |
| Transmission-2 |
| Transmission-2 Transmission |
| Power Shuttle |
|
| Transmission-2 Gears |
| 12 forward |
|
| Loader |
| Loader Loader type |
| L360 |
|
| Loader Height (to pin) |
| 112.3 inches |
|
| Loader Lift to full height (at pin) |
| 2,500 lbs |
|
| 3-Point Hitch |
| Rear Type |
| I/ii |
Ii |
| Rear lift (at 24"/610mm) |
| 3,465 lbs |
3,968 lbs |
| Control |
|
Position And Depth Control |
| Rear lift (at ends) |
|
6,805 lbs |
| Power |
| PTO (claimed) |
| 50 Hp [37.3 Kw] (power Shuttle)51 Hp [38.0 Kw] (synchro) |
72 hp |
| PTO (tested) |
| 51.57 hp |
|
|
Engine |
|
85 hp |
| Engine (gross) |
| 60 hp |
|
| Electrical |
| Ground |
|
Negative |
| Charging system |
| Alternator |
Alternator |
| Charging amps |
| 55 |
52 |
| Tires |
| Ag front |
| 8x169.5x16 |
|
| Ag rear |
| 14.9x2414.9x28 |
|
| Lawn/turf front |
| 27x10.5-1527/12llx15 |
|
| Lawn/turf rear |
| 44-18.00-2022.5llx16.1 |
|
| Industrial front |
| 12-16.5 |
|
| Industrial rear |
| 18.4-24 |
|
| Standard tires (ag) |
|
Front: 7.50-18. Rear: 18.4-30 (2wd) |
| Optional tires (ag) |
|
Front: 7.50-18. Rear: 13.6-38 (2wd) |
| Battery |
| Volts |
| 12 |
12 |
| Number |
| 1 |
|
|
Cold-cranking amps |
| 750 |
|
| Amp-hours |
|
100 |
Challenger MT297B
CaseIH Farmall DX55
CaseIH Farmall 55