Add
Compare:
Overview:
There are 63 differences and 10 similarities between CaseIH Farmall 40B, New Holland Boomer TC35
| Production |
| Model Year |
| 2012 |
2001 |
| Production Manufacturer |
| Caseih |
New Holland |
|
| Capacity |
| Capacity Fuel |
| 9.5 gal |
13 gal |
| Power Take-off (PTO) |
| Power Take-off (PTO) Clutch |
| Electro-hydraulic |
|
| Rear RPMs |
| 540 |
540 |
| Rear PTO |
| Independent |
|
| Mid PTO |
|
Optional |
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
|
| Chassis |
| 4x4 Mfwd 4wd |
4x2 2wd4x4 Mfwd 4wd Optional |
| Brakes |
| Wet Disc |
|
| Cab |
| Two-post Foldable Rops. |
|
| Differential lock |
| Mechanical Rear |
|
| Engine |
| Engine Fuel |
| Diesel |
Diesel |
| Engine Type |
| Mitsubishi S4ql |
New Holland |
| Engine Aspiration |
| Natural |
|
| Engine Cylinders |
| 4 |
3 |
|
Engine Displacement |
| 153 ci |
101.1 ci |
| Engine Cooling |
| Liquid |
Compression: |
|
Engine Rated RPMs |
| 2,600 |
2,600 |
| Engine Air cleaner |
| Dry |
|
|
Engine Power |
| 41 hp |
35 hp |
| Pre-heating |
| Glow Plugs |
|
| Transmission |
| Transmission Type |
| Partially Synchronized |
|
| Transmission Comments |
| Four Synchronized Gears In Four Ranges. |
|
| Transmission Transmission |
|
Synch Shuttle |
| Transmission Gears |
| 16 forward |
12 forward |
| Dimensions |
| Dimensions Width |
|
66.6 inches |
| Dimensions / Weight |
| 3,725 lbs |
3,357 lbs |
| Wheelbase |
| 69 inches |
73.5 inches |
| Length |
| 121 inches |
129.5 inches |
| Front tread |
| 51.7 inches |
|
| Height |
|
95.5 inches |
| Rear Axle |
| Flange |
|
| Height (ROPS) |
| 96 inches |
|
| Hydraulics |
| Hydraulics Type |
| Open Center |
Open Center |
| Pressure |
|
2,280 psi |
| Pump flow |
| 8.2 gpm |
|
| Valve flow |
|
9.8 gpm |
| Gear Steering flow |
| 4.1 gpm |
|
| Hydro Steering flow |
| 5.5 gpm |
|
| Transmission-2 |
| Transmission-2 Type |
| Hydrostatic |
|
| Transmission-2 Transmission |
|
Hydrostatic |
| Transmission-2 Gears |
| Infinite (3-range) Forward And Reverse |
Infinite Forward And Reverse |
| Loader |
| Loader Loader type |
| Caseih L350 |
|
| Loader Height (to pin) |
| 106.8 inches |
|
| Loader Dump angle |
| 51.4 |
|
| Loader Rollback angle |
| 30.3 |
|
| Loader Lift to full height (at pin) |
| 1940 lbs |
|
| Loader Lift to full height (at 500mm) |
| 1370 lbs |
|
| Loader Breakout force (at pin) |
| 3,470 lbs |
|
| Loader Breakout force (at 500mm) |
| 2,300 lbs |
|
| Loader Raise time to height |
| 4.1 s |
|
| Loader Bucket dump time |
| 3.8 s |
|
| Loader Lowering time |
| 2 s |
|
| 3-Point Hitch |
| Rear Type |
| I |
I |
| Rear lift (at 24"/610mm) |
| 2,469 lbs |
2,025 lbs |
| Control |
| Position Control |
|
| Rear lift (at ends) |
| 2,756 lbs |
|
| Power |
| PTO (claimed) |
| 34 hp |
29.6 hp |
|
Engine |
|
35 hp |
| Engine (gross) |
| 41 hp |
|
| Electrical |
| Ground |
| Negative |
|
| Charging system |
| Alternator |
|
| Charging amps |
| 50 |
|
| Tires |
| Ag front |
|
8x16 |
| Ag rear |
|
14.9x24 |
| Industrial front |
|
10x16.5 |
| Industrial rear |
|
17.5lx24 |
| Battery |
| Volts |
| 12 |
|
| Number |
| 1 |
|
|
Cold-cranking amps |
| 660 |
|
| Amp-hours |
| 80 |
|
| Drawbar |
| Drawbar |
| Two-position Swinging Drawbar |
|
CaseIH D40
CaseIH Farmall 40
CaseIH Farmall 50
Kioti DK35SE
Farm Pro 6010
Farm Pro 8220