| Production |
| Model Year |
| 2009 |
2007 |
| Production Manufacturer |
| Agco |
John Deere |
| Factory |
| Beauvais, France |
Waterloo, Iowa, Usa |
|
| Capacity |
| Capacity Fuel |
| 100 gal |
350 gal |
| Hydraulic system |
|
27 gal |
| Power Take-off (PTO) |
| Power Take-off (PTO) Clutch |
|
Electro-hydraulic Wet Disc |
| Rear RPMs |
| 540 |
1000 |
| Rear PTO |
| Independent |
Independent (optional) |
| Front PTO |
| Optional |
|
| Front RPMs |
| 1000 |
|
| Mechanical |
| Mechanical Steering |
| Hydrostatic Power |
Hydrostatic Power |
| Chassis |
| 4x2 2wd |
4x4 Articulated 4wd |
| Brakes |
| Hydraulic Wet Disc |
Hydraulic Wet Discs |
| Cab |
| Cab Standard. Optional Airmaxx Pneumatic Cab Suspension And Automatic Climate Control. |
Commandview Cab Standard With Air-conditioning. Optional Automatic Climate Control And Leather Trim. |
| Differential lock |
| Electro-hydraulc Front And Rear |
Hydraulic Differential Lock Optional |
| Trailer brakes |
| Hydraulic Optional |
Hydraulic Optional |
| Engine |
| Engine Fuel |
| Diesel Electronic Common Rail Fuel Injection |
Diesel |
| Engine Type |
| Sisudiesel 74cta |
John Deere |
| Engine Aspiration |
| Turbocharged Intercooled |
Turbocharged Aftercooled |
| Engine Cylinders |
| 6 |
6 |
| Engine Bore/Stroke |
| 4.252x5.276 Inches [108 X 134 Mm] |
5.197x6.496 Inches [132 X 165 Mm] |
|
Engine Displacement |
| 449.4 ci |
826.7 ci |
| Engine Cooling |
| Liquid |
Liquid |
| Engine Compression |
| 17.5:1 |
16.0:1 |
|
Engine Rated RPMs |
| 2,200 |
2,100 |
| Engine Torque |
| 715.4 lb |
|
| Engine Torque RPMs |
| 1400 |
|
| Engine Starter volts |
| 12 |
12 |
| Engine Air cleaner |
| Dry Cartridge |
Aspirator And Dual Paper Elemnts |
| Engine Valves |
| 24 |
|
|
Engine Power |
| 215 hp |
375 hp |
| Engine Oil capacity |
|
44 qts |
| Engine Emissions |
| Tier Iii |
|
| Engine Coolant |
|
70 qts |
| Pre-heating |
| Air-intake Grid Heater |
|
| Maximum Power |
| 245 hp |
|
| Transmission |
| Transmission Clutch |
| Wet Disc |
Hydraulic Wet Disc |
| Transmission Type |
| Partial Power Shift |
Partial Power Shift |
| Transmission Comments |
| Six Power Shift Gears In Four Synchromesh Ranges. Autodrive Provides Automatic Shifting To Match Load. |
Three Gears (1-3) In Four Ranges (a-d) With High-low Power Shift. Gears And Range Shifts Are Synchronized Using The Clutch. |
| Transmission Transmission |
| Auto-6 |
John Deere Powrsync |
| Transmission Gears |
| 24 forward |
24 forward |
| Transmission Speeds |
|
With 620/70r42 Tires. |
| Dimensions |
| Dimensions Width |
| 79.1 inches |
118.6 inches |
| Weight (operating) |
| 17,460 lbs |
37, 115 Lbs [16835 Kg] (620/70r46 Duals) |
| Length |
| 210 inches |
270 inches |
| Height (cab) |
| 122 inches |
140 inches |
| Rear tread |
| 65 To 83.8 Inches [165 To 212 Cm] |
|
| Weight (Shipping) |
| 17,200 lbs |
34,134 lbs |
| Weight (ballasted) |
| 23,920 lbs |
|
| 2WD Wheelbase |
| 115.95 inches |
|
| 4WD Wheelbase |
| 118.6 inches |
|
| Rear Axle |
| 3.75 inch |
4.331 By 120 Inches [110x3048 Mm] |
| 4WD[154 to 223 cm] 4WD} Front tread |
| 60.9 to |
|
| Height (hood) |
|
105 inches |
| Height (exhaust) |
|
154 inches |
| Clearance (rear axle) |
|
28.8 inches |
| Hinge pin Ground clearance |
|
18.5 inches |
| Hydraulics |
| Hydraulics Type |
| Closed Center Pressure-flow Compensated (pfc) |
Closed Center Pressure-flow Compensated (pfc) |
| Hydraulics Valves |
| 3 to |
4 to |
| Pressure |
| 2,900 psi |
2,900 psi |
| SCV flow |
|
30 gpm |
| Capacity (cu. ft.) |
|
27 gal |
| Total flow |
| 29 gpm |
|
| PowrSync Total flow |
|
44 gpm |
| PowerShift Total flow |
|
48 gpm |
| Hi-Flow Total flow |
|
78 gpm |
| Transmission-2 |
| Transmission-2 Clutch |
|
Electronic Wet Disc |
| Transmission-2 Type |
| Continuously Variable Transmission |
Full Power Shift |
| Transmission-2 Transmission |
| Powermaxx Cvt |
John Deere Powershift |
| Transmission-2 Gears |
| Infinite Forward And Reverse |
18 forward |
| Transmission-2 Speeds |
|
With 620/70r42 Tires. |
| Loader |
| Loader Weight |
| 1670 lbs |
|
| Loader Loader type |
| Agco Fl75 |
|
| Loader Height (to pin) |
| 177 inches |
|
| Loader Dump clearance |
| 143 inches |
|
| Loader Dump reach |
| 26 inches |
|
| Loader Dump angle |
| 52 |
|
| Loader Rollback angle |
| 43 |
|
| Loader Breakout force (bucket) |
| 10,010 lbs |
|
| Loader Lift to full height (at pin) |
| 5,170 lbs |
|
| 3-Point Hitch |
| Rear Type |
| 3/3n |
4n/3 |
| Rear lift (at 24"/610mm) |
| 15,700 lbs |
15,300 lbs |
| Control |
| Electronic Position And Lower-link Draft Control |
|
| Front Hitch |
| 2/3 (optional) |
|
| Front lift |
| 8,800 lbs |
|
| Power |
| PTO (claimed) |
| 180 hp |
320 hp |
| PTO (tested) |
| 189.9 hp |
385.04 hp |
| Drawbar (tested) |
| 167 hp |
302.16 hp |
|
Engine |
| 215 hp |
375 hp |
| Electrical |
| Ground |
| Negative |
Negative |
| Charging system |
| Alternator |
Alternator |
| Charging amps |
| 175 |
200 |
| Tires |
| Standard tires (ag) |
| Front: 420/90r30. Rear: 480/80r46 (4wd) |
|
| Battery |
| Volts |
| 12 |
12 |
| Number |
| 2 |
2 |
|
Cold-cranking amps |
| 550 |
950 |
| Drawbar |
| Drawbar |
|
Catergory 4 Standard With Secondary Chain Support. Optional Reinforcement Up To 11, 000 Pounds. Optional 12, 000 Pounds Catergory 5 Drawbar, Not Available With 3-point Hitch Or Pto. |
AGCO RT165A
AGCO DT225B
AGCO DT250B
Challenger MT645B
CaseIH Steiger 385