Compare | John Deere 3005 | VS | Minot 25 | |
Production | |||||
---|---|---|---|---|---|
Model Year | 2008 | vs | 2010 | ||
Production Manufacturer | John Deere | vs | Jinma | ||
Factory | vs | China | |||
Distributor | vs | Minot |
Capacity | |||||
---|---|---|---|---|---|
Capacity Fuel |
6.3 gal |
vs | 5.8 gal |
||
Capacity Front axle | vs | 4.75 qts |
|||
Hydraulic system |
4 gal |
vs | 2.4 gal |
Power Take-off (PTO) | |||||
---|---|---|---|---|---|
Rear RPMs |
540 |
vs | 540 |
||
Rear PTO | Live (two-stage Clutch) | vs | Live (two-stage Clutch) | ||
Mid PTO | Optional | vs | |||
Mid RPMs |
2,100 |
vs |
Mechanical | |||||
---|---|---|---|---|---|
Mechanical Steering | Manual | vs | Power | ||
Chassis | 4x2 2wd | vs | 4x4 Mfwd 4wd | ||
Brakes | Dry Shoe | vs | |||
Cab | Two-post Rops | vs | Rops With Canopy. |
Transmission | |||||
---|---|---|---|---|---|
Transmission Type | Sliding Gear | vs | |||
Transmission Oil capacity |
16 qts |
vs | 14.8 qts |
||
Transmission Gears |
8 forward |
vs | 12 forward |
||
Transmission Speeds | vs |
Hydraulics | |||||
---|---|---|---|---|---|
Hydraulics Type | Open Center | vs | |||
Hydraulics Valves |
2 |
vs | |||
Pressure |
2,050 psi |
vs | |||
Pump flow |
5.8 gpm |
vs | |||
Capacity (cu. ft.) |
4 gal |
vs | 2.4 gal |
||
Total flow |
10.3 gpm |
vs | 3 gpm |
||
Steering flow |
4.5 gpm |
vs |
3-Point Hitch | |||||
---|---|---|---|---|---|
Rear Type |
I |
vs | |||
Rear lift (at 24"/610mm) |
815 lbs |
vs | 875 lbs |
||
Rear lift | vs | I Lbs [0 Kg] |
Power | |||||
---|---|---|---|---|---|
PTO (claimed) |
24 hp |
vs | |||
Engine (gross) |
27.5 hp |
vs | 25 hp |
Electrical | |||||
---|---|---|---|---|---|
Ground | Negative | vs | |||
Charging system | Alternator | vs | |||
Charging amps |
40 |
vs |
Tires | |||||
---|---|---|---|---|---|
Ag front | vs | 6.00-16 |
|||
Ag rear | vs | 9.5-24 |
|||
Standard tires (ag) | Front: 5.00-15. Rear: 11.2-24 (2wd) | vs |
Battery | |||||
---|---|---|---|---|---|
Volts |
12 |
vs | |||
Number |
1 |
vs | |||
Cold-cranking amps |
500 |
vs |
cancel