Compare | Challenger MT265B | VS | Kubota BX2230 |
Production | |||||
---|---|---|---|---|---|
Model Year | 2005 | vs | 2004 | ||
Production Manufacturer | Iseki | vs | Kubota | ||
Factory | Matsuyama, Japan | vs | |||
Distributor | Agco | vs |
Capacity | |||||
---|---|---|---|---|---|
Capacity Fuel |
10.6 gal |
vs |
Power Take-off (PTO) | |||||
---|---|---|---|---|---|
Rear RPMs |
540 |
vs | |||
Rear PTO | Independent | vs | |||
Mid PTO | Optional | vs | |||
Mid RPMs |
2000 |
vs |
Mechanical | |||||
---|---|---|---|---|---|
Mechanical Steering | Hydrostatic Power | vs | Hydrostatic Power | ||
Chassis | 4x4 Mfwd 4wd | vs | 4x4 Mfwd 4wd | ||
Brakes | Wet Disc | vs | |||
Cab | Two-post Foldable Rops | vs |
Transmission | |||||
---|---|---|---|---|---|
Transmission Type | Hydrostatic | vs | |||
Transmission Transmission | vs | Hydrostatic | |||
Transmission Gears | Infinite (3-range) Forward And Reverse | vs | Infinite Forward And Reverse | ||
Transmission Speeds | vs |
Hydraulics | |||||
---|---|---|---|---|---|
Hydraulics Type | Open Center | vs | |||
Pressure |
2,276 psi |
vs | |||
Valve flow |
8.3 gpm |
vs | |||
Total flow |
12.7 |
vs | |||
Steering flow | 4.4 Gpm [16.7 Lpm] (sync Shuttle)5.4 Gpm [20.4 Lpm] (power Shuttle/hydro) | vs |
3-Point Hitch | |||||
---|---|---|---|---|---|
Rear Type |
I |
vs | |||
Rear lift (at 24"/610mm) |
2,535 lbs |
vs | |||
Rear lift (at ends) |
2,800 lbs |
vs |
Power | |||||
---|---|---|---|---|---|
PTO (claimed) | 26.0 Hp [19.4 Kw] (gear)24.5 Hp [18.3 Kw] (hydro) | vs | 16.7 hp |
||
Engine |
33 hp |
vs |
Electrical | |||||
---|---|---|---|---|---|
Ground | Negative | vs | |||
Charging system | Alternator | vs | |||
Charging amps |
40 |
vs |
Tires | |||||
---|---|---|---|---|---|
Ag front |
8-16 |
vs | |||
Ag rear |
12.4-2413.6-24 |
vs | |||
Lawn/turf front | 27x8.50-15 | vs | |||
Lawn/turf rear | 41x14.00-20 | vs | |||
Industrial front |
10-16.5 |
vs | |||
Industrial rear |
14.9-24 |
vs |
Battery | |||||
---|---|---|---|---|---|
Volts |
12 |
vs | |||
Number |
1 |
vs |
cancel