Home > Farm Tractors > Comparison

Compare	Challenger MT225B	VS	John Deere 6330 Premium

Add another Item to this comparison Add Item

Overview:

There are 120 differences and 11 similarities between Challenger MT225B, John Deere 6330 Premium

Production
Model Year		2005	vs	2007
	[X] Add Comment about “Model Year”
Production Manufacturer		Iseki	vs	John Deere
	[X] Add Comment about “Production Manufacturer”
Factory		Matsuyama, Japan	vs	Mannheim, Baden-w Rttemberg, Germany
	[X] Add Comment about “Factory”
Original price (USD)			vs	$76, 601 (2010)
	[X] Add Comment about “Original price (USD)”
Distributor		Agco	vs
	[X] Add Comment about “Distributor”

Capacity
Capacity Fuel		6.6 gal	vs	48 gal
	[X] Add Comment about “Capacity Fuel”
Hydraulic system			vs	13.2 Gal [50.0 L] 15.9 Gal [60.2 L] (ivt)
	[X] Add Comment about “Hydraulic system”

Power Take-off (PTO)
Rear RPMs		540	vs	540
	[X] Add Comment about “Rear RPMs”
Rear PTO		Independent	vs	Independent
	[X] Add Comment about “Rear PTO”
Front PTO			vs	Optional
	[X] Add Comment about “Front PTO”
Mid PTO		Standard	vs
	[X] Add Comment about “Mid PTO”
Mid RPMs		2000	vs
	[X] Add Comment about “Mid RPMs”
Front RPMs			vs	1000
	[X] Add Comment about “Front RPMs”

Mechanical
Mechanical Steering		Hydrostatic Power	vs	Hydrostatic Power
	[X] Add Comment about “Mechanical Steering”
Chassis		4x4 Mfwd 4wd	vs	4x2 2wd4x4 Mfwd 4wd Optional
	[X] Add Comment about “Chassis”
Brakes		Wet Disc	vs	Differential Hydraulic Wet Disc
	[X] Add Comment about “Brakes”
Cab		Two-post Rops	vs	Comfortgard Cab Standard.
	[X] Add Comment about “Cab”

Engine
Engine Fuel		Diesel	vs	Diesel
	[X] Add Comment about “Engine Fuel”
Engine Type		Iseki	vs	John Deere 4045hl480 Powertech Plus Inline Vertical
	[X] Add Comment about “Engine Type”
Engine Aspiration		Natural	vs	Variable Geometry Turbocharger
	[X] Add Comment about “Engine Aspiration”
Engine Cylinders		3	vs	4
	[X] Add Comment about “Engine Cylinders”
Engine Bore/Stroke			vs	4.15x5.00 Inches [105 X 127 Mm]
	[X] Add Comment about “Engine Bore/Stroke”
Engine Displacement		68.5 ci	vs	276 ci
	[X] Add Comment about “Engine Displacement”
Engine Cooling		Liquid	vs	Liquid
	[X] Add Comment about “Engine Cooling”
Engine Compression			vs	17:1
	[X] Add Comment about “Engine Compression”
Engine Rated RPMs		2,600	vs	2,300
	[X] Add Comment about “Engine Rated RPMs”
Engine Torque			vs	318 lb
	[X] Add Comment about “Engine Torque”
Engine Torque RPMs			vs	1500
	[X] Add Comment about “Engine Torque RPMs”
Engine Starter volts		12	vs	12
	[X] Add Comment about “Engine Starter volts”
Engine Valves			vs	16
	[X] Add Comment about “Engine Valves”
Engine Power		22.5 hp	vs
	[X] Add Comment about “Engine Power”
Engine Oil capacity			vs	16.8 qts
	[X] Add Comment about “Engine Oil capacity”
Engine Emissions			vs	Tier Iii
	[X] Add Comment about “Engine Emissions”
Engine Starter			vs	Electric
	[X] Add Comment about “Engine Starter”
Engine Coolant			vs	30.8 qts
	[X] Add Comment about “Engine Coolant”
Engine Starter power			vs	4 hp
	[X] Add Comment about “Engine Starter power”
Engine Firing order			vs	1-3-4-2
	[X] Add Comment about “Engine Firing order”
Engine Intake valve clearance			vs	0.01
	[X] Add Comment about “Engine Intake valve clearance”
Engine Exhaust valve clearance			vs	0.02
	[X] Add Comment about “Engine Exhaust valve clearance”
Engine Idle RPMs			vs	850-2460
	[X] Add Comment about “Engine Idle RPMs”
Engine Operating RPMs			vs	1500-2300
	[X] Add Comment about “Engine Operating RPMs”
Engine Rated Power (EC 97/98)			vs	105 hp
	[X] Add Comment about “Engine Rated Power (EC 97/98)”

Transmission
Transmission Type		Hydrostatic	vs	Partial Power Shift
	[X] Add Comment about “Transmission Type”
Transmission Comments			vs	Four Gears (1-4) In Four Ranges (a-d) With Reverser. Push-button Power Shifts Between Gears. Range Shift Lever Is Synchronized Using Foot Or Optional Push-button Hand Clutch. Reverser Lever Provides Power Shuttle Between Forward And Reverse.
	[X] Add Comment about “Transmission Comments”
Transmission Oil capacity			vs	51.6 qts
	[X] Add Comment about “Transmission Oil capacity”
Transmission Transmission			vs	John Deere Powrquad Plus
	[X] Add Comment about “Transmission Transmission”
Transmission Gears		Infinite (2-range) Forward And Reverse	vs	16 forward
	[X] Add Comment about “Transmission Gears”
Transmission Speeds			vs	With 18.4r38 Rear Tires.
	[X] Add Comment about “Transmission Speeds”

Dimensions
Dimensions Width		48 inches	vs
	[X] Add Comment about “Dimensions Width”
Dimensions / Weight		1604 lbs	vs
	[X] Add Comment about “Dimensions / Weight”
Wheelbase		59.8 inches	vs	94.5 inches
	[X] Add Comment about “Wheelbase”
Length		102 inches	vs
	[X] Add Comment about “Length”
Front tread			vs	58.5 To 96 Inches (2wd)[148 To 243 Cm] (2wd) 60 To 79.4 Inches (4wd)[152 To 201 Cm] (4wd)
	[X] Add Comment about “Front tread”
Rear tread			vs	63.1 To 90.6 Inches [160 To 230 Cm]
	[X] Add Comment about “Rear tread”
Height		77 inches	vs
	[X] Add Comment about “Height”
2WD turn radius		7.9 feet	vs
	[X] Add Comment about “2WD turn radius”
Weight (Shipping)			vs	9, 491 Lbs [4305 Kg] (2wd)10, 009 Lbs [4540 Kg] (4wd)
	[X] Add Comment about “Weight (Shipping)”
Ground Clearance		10.4 inches	vs
	[X] Add Comment about “Ground Clearance”
Rear Axle			vs	3.1 By 100.6 Inches [78x2555 Mm]
	[X] Add Comment about “Rear Axle”
Weight (max capacity)			vs	19,835 lbs
	[X] Add Comment about “Weight (max capacity)”
Drawbar capacity			vs	4,960 lbs
	[X] Add Comment about “Drawbar capacity”
Front axle load			vs	4, 520 Lbs [2050 Kg] (2wd)9, 255 Lbs [4198 Kg] (4wd)11, 025 Lbs [5000 Kg] (2wd Loader)12, 790 Lbs [5801 Kg] (4wd Loader)
	[X] Add Comment about “Front axle load”
Rear axle load			vs	14,990 lbs
	[X] Add Comment about “Rear axle load”

Hydraulics
Hydraulics Type		Open Center	vs	Closed Center Pressure-flow Compensated (pfc)
	[X] Add Comment about “Hydraulics Type”
Pressure		1990 psi	vs	2,900 psi
	[X] Add Comment about “Pressure”
Capacity (cu. ft.)			vs	13.2 Gal [50.0 L] 15.9 Gal [60.2 L] (ivt)
	[X] Add Comment about “Capacity (cu. ft.)”
Valve flow		5.5 gpm	vs	29 gpm
	[X] Add Comment about “Valve flow”
Total flow		8.1 gpm	vs
	[X] Add Comment about “Total flow”
Rear valves			vs	2 to
	[X] Add Comment about “Rear valves”
Steering flow		2.64 gpm	vs
	[X] Add Comment about “Steering flow”

Transmission-2
Transmission-2 Type		vs	Partial Power Shift
	[X] Add Comment about “Transmission-2 Type”
Transmission-2 Comments		vs	Four Gears (1-4) In Six Ranges (a-f) With Reverser. Similar To Powrquad With Added Auto Mode. Auto Mode Automatically Shifts Gears To Match Load And Throttle Position.
	[X] Add Comment about “Transmission-2 Comments”
Transmission-2 Oil capacity		vs	52.8 qts
	[X] Add Comment about “Transmission-2 Oil capacity”
Transmission-2 Transmission		vs	John Deere Autoquad Plus
	[X] Add Comment about “Transmission-2 Transmission”
Transmission-2 Gears		vs	24 forward
	[X] Add Comment about “Transmission-2 Gears”
Transmission-2 Speeds		vs	With 18.4r38 Rear Tires. Reverse Speeds Slightly Faster Than Forward.
	[X] Add Comment about “Transmission-2 Speeds”

Loader
Loader Loader type		vs	John Deere 563
	[X] Add Comment about “Loader Loader type”
Loader Height (to pin)		vs	136 inches
	[X] Add Comment about “Loader Height (to pin)”
Loader Dump angle		vs	71
	[X] Add Comment about “Loader Dump angle”
Loader Rollback angle		vs	38
	[X] Add Comment about “Loader Rollback angle”
Loader Lift to full height (at pin)		vs	2, 755 Lbs [1249 Kg] (nsl)3, 218 Lbs [1459 Kg] (sl)
	[X] Add Comment about “Loader Lift to full height (at pin)”
Loader Breakout force (lift)		vs	4, 968 Lbs [2253 Kg] (nsl)5, 035 Lbs [2283 Kg] (sl)
	[X] Add Comment about “Loader Breakout force (lift)”

Loader-2
Loader-2 Loader type		vs	John Deere 673
	[X] Add Comment about “Loader-2 Loader type”
Loader-2 Height (to pin)		vs	145 inches
	[X] Add Comment about “Loader-2 Height (to pin)”
Loader-2 Dump angle		vs	74
	[X] Add Comment about “Loader-2 Dump angle”
Loader-2 Rollback angle		vs	43
	[X] Add Comment about “Loader-2 Rollback angle”
Loader-2 Lift to full height (at pin)		vs	2, 821 Lbs [1279 Kg] (nsl)3, 791 Lbs [1719 Kg] (sl)
	[X] Add Comment about “Loader-2 Lift to full height (at pin)”
Loader-2 Breakout force (lift)		vs	5, 620 Lbs [2549 Kg] (nsl)5, 732 Lbs [2600 Kg] (sl)
	[X] Add Comment about “Loader-2 Breakout force (lift)”

Engine-2
Engine-2 Fuel		vs	Diesel
	[X] Add Comment about “Engine-2 Fuel”
Engine-2 Type		vs	John Deere 4045hl281 Powertech E Vertical Inline
	[X] Add Comment about “Engine-2 Type”
Engine-2 Aspiration		vs	Turbocharged
	[X] Add Comment about “Engine-2 Aspiration”
Engine-2 Cylinders		vs	4
	[X] Add Comment about “Engine-2 Cylinders”
Engine-2 Bore/Stroke		vs	4.19x5.00 Inches [106 X 127 Mm]
	[X] Add Comment about “Engine-2 Bore/Stroke”
Engine-2 Displacement		vs	276 ci
	[X] Add Comment about “Engine-2 Displacement”
Engine-2 Cooling		vs	Liquid
	[X] Add Comment about “Engine-2 Cooling”
Engine-2 Compression		vs	19:1
	[X] Add Comment about “Engine-2 Compression”
Engine-2 Rated RPMs		vs	2,300
	[X] Add Comment about “Engine-2 Rated RPMs”
Engine-2 Torque		vs	318 lb
	[X] Add Comment about “Engine-2 Torque”
Engine-2 Torque RPMs		vs	1500
	[X] Add Comment about “Engine-2 Torque RPMs”
Engine-2 Comments		vs	The Two-valve-per-cylinder Powertech E Engine Was Available As An Option On The John Deere 6330 Premium And Is The Same Engine Offered On The Basic 6330. The Powertech E Engine's Advantage Was That It Does Not Use Exhaust Gas Recirculation (egr).
	[X] Add Comment about “Engine-2 Comments”
Engine-2 Air cleaner		vs	Dual Dry Element
	[X] Add Comment about “Engine-2 Air cleaner”
Engine-2 Oil capacity		vs	16.8 qts
	[X] Add Comment about “Engine-2 Oil capacity”
Engine-2 Emissions		vs	Tier Iii
	[X] Add Comment about “Engine-2 Emissions”
Engine-2 Coolant		vs	30.8 qts
	[X] Add Comment about “Engine-2 Coolant”
Engine-2 Firing order		vs	1-3-4-2
	[X] Add Comment about “Engine-2 Firing order”
Engine-2 Intake valve clearance		vs	0.01
	[X] Add Comment about “Engine-2 Intake valve clearance”
Engine-2 Exhaust valve clearance		vs	0.02
	[X] Add Comment about “Engine-2 Exhaust valve clearance”
Engine-2 Idle RPMs		vs	850-2460
	[X] Add Comment about “Engine-2 Idle RPMs”
Engine-2 Operating RPMs		vs	1500-2300
	[X] Add Comment about “Engine-2 Operating RPMs”
Engine-2 Rated Power (EC 97/98)		vs	105 hp
	[X] Add Comment about “Engine-2 Rated Power (EC 97/98)”

3-Point Hitch
Rear Type		I	vs	Iiiiin/ii (optional)
	[X] Add Comment about “Rear Type”
Rear lift (at 24"/610mm)		591 lbs	vs	5, 060 Lbs [2295 Kg] 7, 231 Lbs [3279 Kg] (optional)
	[X] Add Comment about “Rear lift (at 24"/610mm)”
Rear lift (at ends)		1190 lbs	vs
	[X] Add Comment about “Rear lift (at ends)”

Power
PTO (claimed)		17.6 hp	vs	85 Hp [63.4 Kw] (2-valve)95 Hp [70.8 Kw] (4-valve)
	[X] Add Comment about “PTO (claimed)”
PTO (tested)			vs	105 hp
	[X] Add Comment about “PTO (tested)”
Drawbar (tested)			vs	79.9 hp
	[X] Add Comment about “Drawbar (tested)”
Engine		22.5 hp	vs
	[X] Add Comment about “Engine”
Engine (gross)			vs	105 hp
	[X] Add Comment about “Engine (gross)”

Electrical
Ground		Negative	vs	Negative
	[X] Add Comment about “Ground”
Charging system		Alternator	vs	Alternator
	[X] Add Comment about “Charging system”
Charging amps			vs	115
	[X] Add Comment about “Charging amps”
Charging volts			vs	14
	[X] Add Comment about “Charging volts”

Tires
Ag front		6-12	vs	10.00-16 (2wd)12.4r24 (4wd)
	[X] Add Comment about “Ag front”
Ag rear		9.5-16	vs	16.9r30
	[X] Add Comment about “Ag rear”
Lawn/turf front		23x10.50-12	vs
	[X] Add Comment about “Lawn/turf front”
Lawn/turf rear		33x12.50-16.5	vs
	[X] Add Comment about “Lawn/turf rear”
Industrial front		23x8.50-12	vs
	[X] Add Comment about “Industrial front”
Industrial rear		12x16.5	vs
	[X] Add Comment about “Industrial rear”